Category: Workstation Crane Info

A freestanding workstation crane is a seamless solution for conditions where an overhead crane setting is otherwise problematic or unreasonable. Because the runways are frequently fitted above the ground without footers, it works fine in pre-cast solid buildings.

Since all links are secured, it is easily pulled and relocated to a new site, a benefit when used in rented buildings either within your plant or in an entirely new setting. The freestanding workstation crane’s low headroom design makes the most of the lift when headroom is at the top. A freestanding workstation crane provides extremely effective, price efficient lifting and moving solutions, especially when you need overhead crane handling for a huge zone up to 40-feet extensive and with infinite length. With unified parallel systems, you can cover your entire structure.

It is also very convenient when you rent or lease your space. A freestanding workstation crane is the flawless ergonomic key for spreading lifting handling and providing complete access to measured area. These sorts of overhead cranes can interchange numerous cranes with one fluid system for better-quality good organization and production. So many workstations replace loads of wheeler-dealers with freestanding workstation crane to refuge their complete machining center totally eradicating the need to transference of files from one manipulator to another and considerably improving manufacture time, worker protection, and complete efficiency.

Free Standing Workstation Crane Fills Many Needs

Workstation cranes are a trustworthy solution for your needs. Specially intended to handle lots up to 4,400 lbs., a free-standing bridge crane can be with no trouble fitted into a present or different workstation to provide immediate lifting aid. With spans extending from 10 to over 34 feet accessible and dissimilar pathway profiles, workstation cranes empower you to enhance the working region below the crane and progress efficiency.

The assembly of a bridge crane is the header which is steady at the ends. The header and runway beams are joined to the top of the pilaster with an inflexible moment fitting them together. For that reason, header movement does away with the necessity for joint and additional braces, which keeps the workstation free of an impediment for use of the work area. Header movement also disregards the need to brace the crane erection to the building structure, which is most typically where you will find the crane.

Conclusion

The bridge on a workstation crane may be near the very uppermost of the building, which sets up for a thorough hook elevation.

A workstation bridge crane is a truly innovative invention. Unlike normal overhead cranes, a bridge crane works slightly differently. Although the basic principle is lifting things and getting it from one point to another, the bridge crane involves a ‘bridge’ as the name suggests, which allows for all the weight to be transferred to a self supported structure and not the building itself where the crane is used. This method is usually used in overhead handling of heavy objects and building materials.

These cranes are mounted on the floor with an overhead bridge which covers all the area of the building.  They have an amazingly vast variety of applications and benefits due to which they are considered to be one of the most effective crane systems for overhead handling and transportation.

Here are few of the many benefits of a Workstation Bridge Crane:

• All types of workstation bridge cranes come in individually picked custom sizes which are often adjustable to suit the needs of the building. Space management is, hence, never an issue.
• A workstation bridge crane can support up to 4000 lbs of weight which is more than enough to move any kind of building material along the bridge.
• Due to its amazing economical design and the low power consumption, it costs lesser than normal cranes. It is in fact, one of the best value cranes out there and will definitely provide more output for lesser investment.
• The cranes include rigid runways and smooth rolling tracks for the most efficient handling and transportation of objects from one point of the bridge to another. Load positioning is always optimum and trolleys and the bridge move smoothly in every turn.
• Putting together a bridge crane is the easiest job in the world. It includes simple bolting together of no more than four columns and with the help of a few man hours of time, any normal person can do it without the help of a welder.
• Its maintenance is typically easy because of the fact that very little of it is required. This shows its long lasting life and how it becomes a long term investment for the buyer.
• Its relocation is again, extremely easy for anyone who wishes to use it somewhere else. This is because of its modular design.
• In a bit more expensive versions, the crane even has multiple bridges or tracks which can lift and deliver more than two items at one time.

Therefore, you see how workstation bridge cranes are truly phenomenal, in both design and efficiency. Indeed, an investment here would be of certain profit.

A workstation crane system is designed to meet the varied and demanding requirements of workstations and production lines that need up to 2,000 kg of lifting capacity. They can be ceiling-mounted or freestanding, single or double girder bridges or even monorails. For operations that require workers to make precise, repetitive movements, a workstation crane system is used as an ergonomic and cost-effective option, without the architectural investments often involved when installing an overhead crane. Workstation crane with standard profile sizes and bolt-on connections can be installed quickly. In some cases, it has taken less than one day. With this kind of speed, and adapting the installation to your existing production schedules, the main aim is to minimize equipment and production downtime. If your business depends on workers making repetitive movements or lifting heavy loads, then a workstation crane system can be a fast and easy way to improve productivity.

Workstation Crane System is an Overhead Crane

Overhead cranes cover a rectangular area, moving a load side to side and backward and forward. The lifting device, called a hoist is mounted on a trolley for horizontal movement across a bridge beam connected to one or more horizontal girders which are supported at either end by end truck. The end trucks are attached at right angles to the girders and move on fixed runways. The horizontal travel of push type cranes is powered manually by the operator; alternatively, an electric overhead crane is powered by electricity. Still, other cranes can be air-powered (pneumatic). Considering the fact that an overhead crane can operate on any plant floor surface, and because they can be modified to accommodate changing needs, overhead cranes provide flexibility to an operation. Overhead cranes can be customized with below the hook attachments, end effectors or specialized tooling to handle a diverse variety of products and loads. By doing the heavy lifting, overhead cranes take strain off operators, reducing fatigue and lowering the risk of injury. Overhead bridge cranes take product up and over obstacles, instead of navigating back and forth through aisles. Radio remote controls and independent traveling push-button pendants allow for a better view while keeping the operator away from the load and any associated danger. Incorporating the latest technologies and offered in a variety of usage and capacity ratings, overhead cranes require less maintenance compared to other lifting devices. Highly automated systems maneuver with the precision of one thousandth of the rated speed to an exact location. By allowing for smooth, direct-path transportation over obstacles with soft start features, multiple speed options and a variety of end effectors to interface with and secure the load products are handled gently to minimize damage. Because they operate overhead and work in a specific area, overhead cranes are less likely than forklift traffic to maneuver loads into personnel, walls, machinery or other obstacles.

Workstation cranes are efficient and effective solutions for every day lifting needs. They are specifically designed to meet the varied and demanding requirements of workstations and production lines that require up to 2,000 kg of lifting capacity. They enable operators to achieve effortless and reliable area-serving overhead handling for a wide variety of applications by configuring each system with the operator in mind and include the principle feature of ease of movement, designed to reduce fatigue and ensure accurate load positioning. The span ranging from 10 to over 34 feet which can be easily installed into an existing or new workstation to provide instant lifting assistance. They allow optimal utilization of the working area below the crane and increased productivity. A workstation crane can be ceiling-mounted or freestanding, single or double girder bridges or even monorails.

Workstation Cranes are Cost Effective

Workstation cranes are cost-effective options which don’t require architectural investments which are mostly required for installing overhead crane. They help operators make precise, repetitive movements. The enclosed track on the workstation crane extends far which allow the full coverage necessary for production and assembly lines. Their standard profile sizes and bolt on connections can be quickly installed within a day which will help reduce production downtime and save cost. It will help save workers the stress of repetitive movements and lifting heavy loads making it fast and increasing productivity. Workstation cranes are available in both aluminum and steel form.

Workstation cranes allow workers to achieve effortless and reliable area-serving overhead handling for a wide variety of applications. Each system is configured to suit the operators taste and includes the principle feature of ease of movement, designed to reduce fatigue and ensure accurate load positioning. They can be extended and relocated quite easily and allow for manual handling. These workstation cranes are equipped with splice joints that connect the track sections and are completed with vertical and horizontal adjustment screws, facilitating precise alignment of the track sections.

Two types of workstation cranes exist which are the ceiling mounted and free standing system:

• Floor Mounted Crane is not a permanent part of a factory and can be easily relocated at any point in time. Installation of this is much easier and doesn’t involve the stress of building a roof structure.
• Ceiling Mounted is preferred when there is limited floor space or access for other equipment is needed where floor support steel will be required. Here the support structure is suitable for the loads imposed.