Safe Operations of Cranes | Crane Safety Tips

safe crane operations, safe operations of cranes, crane safety tip, crane safety tips

Cranes have made things easy. Knowing some great crane safety tips is crucial. This complex machine needs to be operated with the utmost care to avoid accidents at workplaces. Generally, cranes are used to move heavy things around and transport them to a new location. 

When cranes are operated incorrectly, mid-operation may result in hazards or a disastrous situation in which people around the operating ground may get injured or lose their lives. This is why it is important to always practice safe operation with cranes. This post will expose you to the hazards that could happen while operating a crane and the preventative measures to take to avoid these hazards from happening.

Prevent Falling Load

One of the ways to have a safe crane operation is to prevent the load from falling by taking the following preventive measures:

  • Ensure that the operator is duly trained and competent to operate the machine.
  • Secure the load properly to prevent it from slipping off the crane.
  • Avoid two-blocking; this usually occurs as a result of the uppermost hoist line component touching the boom tip, or upper block. In this situation, there is increased tension on the which may result in falling of crane component and loads.

Pay Attention to the Safe Working Load | Major Crane Safety Tip

Avoid loading the crane with too much load than it can take. Some cranes cannot execute lifting of excessive load. The capacity of each type of crane should be known and worked with. Ensure they do not take more load tha they can safely lift.

Majority of structural failures that occur in crane operations is often as a result of overloading the crane. Overloading can make some of the components of the machine to become defective.

Check The Oil and Fluid Levels:

Before starting any operation, make sure to check the oil and fluid level. Ensure that there is a sufficient amount of oil, water, and other fluids to avoid issues from mechanical problems. This is a very common crane safety tip.

Prevent Electrical Hazard

Electrical hazard is of the most common hazards that happen with crane operations. Be careful not to allow the hoist line or boom to touch the energized power lines when moving materials. In this case, materials touching the crane are likely to be electrocuted, while this may also put other workers at risk.

Conclusion

Electrical hazard is of the most common hazards that happen with crane operations. Be careful not to allow the hoist line or boom to touch the energized power lines when moving materials. In this case, materials touching the crane are likely to be electrocuted, while this may also put other workers at risk.